1 1
Dynamic Lamps

Turntable Belt for GARRARD Model V-VI VVI
7.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Confirm the complete equipment model GARRARD V-VI VVI and match replacement reference FRZ 17.2. Production revisions can use different mechanisms, and an old belt or tire may have stretched.

Need help confirming fit? Email help@dynamiclamps.com with the manufacturer, model, and clear photos of the equipment label and old part.

Specifications

FRZ 17.2 drive belt specifications

Belt code FBS 17.2 (FRZ 17.2)
Type Flat belt
Circumference 17.2 in. (43.68 cm)
Width .15 in. (4.0 mm)
Thickness .03 in. (.9 mm)
Material Rubber
Country of origin Taiwan
Equipment compatibility

Compatible-equipment references

The list below consolidates the established Dynamic Lamps applications for the exact FRZ 17.2 family. Notes about belt position or quantity remain part of the fit reference.

  • GARRARD V-VI VVI
  • GARRARD 40-B 40B
  • Garrard: 40-B, 40B
  • GARRARD 86-SB 86SB
  • Garrard: 86-SB, 86SB
  • GARRARD 100C 100S 100SC
  • Garrard: 100C, 100S, 100SC
  • GARRARD 125-SB 125SB
  • Garrard: 125-SB, 125SB
  • GARRARD GT-10 GT-12 GT-15
  • Garrard: GT-10, GT-12, GT-15, GT10, GT12, GT15
  • GARRARD GT-25 GT-35/P GT-55
  • Garrard: GT-25, GT-35/P, GT-55, GT25, GT35P, GT55
  • GARRARD GT-120AP GT120AP
  • Garrard: GT-120AP, GT120AP
  • GARRARD GT-250 GT-250P GT-250AP
  • Garrard: GT-250, GT-250P, GT-250AP, GT250, GT250P, GT250AP
  • GARRARD GT-350 GT-350A GT-350AP
  • Garrard: GT-350, GT-350A, GT-350AP, GT350, GT350A, GT350AP
  • GARRARD 0-100-SB 0100SB
  • Garrard: 0-100-SB, ZERO-100-SB, 0100SB, ZERO100SB
  • GARRARD SP-25 Mk V
  • Garrard: SP-25, Mk, V, SP25MkV
  • GARRARD SP-35 Mk V
  • Garrard: SP-35, Mk, V, SP35MkV
  • Garrard: V-VI, VVI
  • GARRARD X-40-B X40B
  • Garrard: X-40-B, X40B

Model suffixes and production revisions can use different mechanisms. The service manual, model plate, and original part path take precedence.

Related products and fit checks

Before choosing another size

No different size or profile is presented as an automatic substitute for FRZ 17.2. Circumference, width, thickness, cross-section, installed tension, and operating position all affect performance.

Installation and safety

Installation guidance

  1. Disconnect power and remove the platter or access cover as directed by the equipment manual.
  2. Remove belt residue and clean the motor pulley and belt path without leaving oil.
  3. Install the belt in the specified path without twists, then rotate the mechanism by hand before powering it.

Follow the current equipment service instructions when they differ from this general guidance.